No Salt Water Softener - Salt Free Home Water Treatment System

100% Money Back GuarenteeNo Salt - Chemical Free
(888)-827-9052
Easy DO-IT-YOURSELF Installation

Boiler Sytems Water Conditioning


Millions of boilers are in use throughout the world. Most of them are not properly treated for the prevention of scale and corrosion. Normally only boilers that are maintained by full time licensed boiler operators receive proper treatment Even then, most boilers will scale. Adding chemicals to boilers is the most commonly used method for preventing scale and corrosion. This practice is hazardous, as the chemicals are themselves; toxic and corrosive in high concentrations. Additionally chemical treatment is dependent on the competency of the boiler operator and the chemical company that supplies the chemicals and performs the water testing required to properly maintain the correct concentration of chemicals.


MOST BOILERS WILL SCALE EVEN WITH CHEMICAL TREATMENT. MAGNETICALLY TREATING BOILERS WILL ENHANCE THE EFFICIENCY OF CHEMICALS IF THE OPERATOR CHOOSES TO CONTINUE TO USE CHEMICALS.


Scale in boilers forms on the hot internal surfaces that transfer the heat from the fuel to the water. Any time water is heated it loses its ability to hold minerals in solution. The minerals contained in the water precipitate out and crystallize on the hot tubes of the boiler. This scale forms a heat insulating barrier between the tubes and the water. Each 1/8in accumulation of scale will retard heat transfer by 15-20%. Scale build up of 1/4in to 1/2in are common. Efficiency degeneration can easily exceed 60% with an accumulation of 1/2in scale.


FAQ's | Testimonials | Site Map | Contact Us | Privacy Policy

Email Us - (888)-827-9052 | 1146 N Mesa DR #102, Mesa AZ 85201

Copyright © Clearwater GMX All Rights Reserved.

PRchecker.info