GMX Five Star Pool Water Conditioning System

No Salt Water Softener - Salt Free Home Water Treatment System

100% Money Back GuarenteeNo Salt - Chemical Free
(888)-827-9052
Easy DO-IT-YOURSELF Installation


GMX-1848 Spa Water Conditioning System
and Installation Instructions.

See all the GMX Systems and the current discount prices Here.

GMX-1848 Spa Conditioning System
This system includes One (1) GMX Model 848 Device
Discount Price (plus s&h): Only $189
(Save $21.00)

$189.00 plus $20 UPS shipping and handling to your door.

This Five Star Spa Water Conditioning System" is designed for portable spas that are not built in the ground. This type of spa is usually sitting on a cement slab. If you have an in ground spa, then this system is NOT for you. Please go to our Pool and Spa Systems Page and select the correct GMX System for your spa. If you are not sure, please contact us via telephone at (928) 978-0757 or via email   .

If you have a highly customized pool system, please contact us via telephone at (928) 978-0757 or via email   .

The 5 Star Spa  Water Conditioner. Model 1848

This Device is placed over one of the pipes that returns the water to the spa.

The GMX device easily clamps over the outside of your existing pipes. The is no need to cut the pipes. Complete instructions below.

Mount horizontally or vertically
on your existing pipe.

To determine the correct system for your pool/spa, click here.
 

GMX Five Star System Installation Instructions

These GMX devices can be easily placed on the outside of CPVC, PEX, PVC, or any type of Copper, Rubber or Plastic pipe.

Selecting the Proper Location for this Device.

You should mount this device on one of the pipes that are returning the water to the spa, after it has been filtered and heated. If possible, place this device on the main return line that feeds all jets, preferred, but usually not possible.

This single GMX Model 848 device will take up about 5" to 6" of pipe space.

Additional Considerations:

  • This location MUST be at least 6" downstream of (after) your spa heater.

  • This location MUST be at least 24" downstream of (after) the spa pump.

Questions: Please call (928) 978-0757 or email   .

Installing The GMX Devices
Click Image Below to See Actual Device.

One GMX Model 848 device properly mounted.

Clean and/or Back Flush your Spa filter thoroughly
PRIOR to installing the GMX Device.

  1. Place the GMX Model 848 device against the pipe to be treated.

  2. Place the backing plate on the opposite side of the pipe and align the holes with the device.

  3. Insert the nylon bolts through the holes in the device and backing plate. Then secure with the nylon wing-nuts. These bolts can pass through the device and the backing plate in either direction.

  4. Tighten the wing-nuts until the device is snug against the pipe. Do not over tighten !

  5. You are finished with the installation.

Spa Stabilization After Installation

After installation, run your spa continuously for the first five to seven days to remove the scale build-up from the heater and other surfaces. You must THEN drain and refill to the proper level and run for at least twenty-four more hours. This will purge the excess minerals from the spa water.

In many circumstances, no chemicals are required to maintain crystal clear water with no scale build-up as long as the pump is run at least two hours per day.

Installation Instructions are Shipped with Each System.


FAQ's | Testimonials | Site Map | Contact Us | Privacy Policy

Email Us - (888)-827-9052 | 1146 N Mesa DR #102, Mesa AZ 85201

Copyright © Clearwater GMX All Rights Reserved.

PRchecker.info